General instructions to the installation process

• To update the firmware of the DIRECTOR please download the Updater and install all programs which are included in the installation routine.
• You need "administrator rights" on your PC to install the programs.
• Close the DSP PC-Tool software if it is still opened.
• The update process can take several minutes.
• Please wait until the process is successfully finished.
• Do not remove power from the device during this procedure.
• Do not launch the DPS PC-Tool Software during the update.
• Install the provided USB driver in the installation process.
• The USB driver can also be downloaded here: Download USB driver
• Note: It is mandatory to update the DSP PC-Tool to Version 4.75a or higher to use this DIRECTOR Version. Before installing the DIRECTOR Updater 1.76 / 2.08, it is also mandatory to uninstall all previous DIRECTOR Updater versions and the ATMEL SAM-BA from your computer to avoid problems during the update.

To update the device carefully perform the following steps:

1. Install the DIRECTOR Updater (re-start your computer after its first Installation).
2. Connect the DIRECTOR via its USB port to your computer and turn on the device.
3. Activate the "System Update" function in the DIRECTOR menu (Menu --> System --> System Update).
4. Launch the DIRECTOR Updater software.
5. Click on "Update DIRECTOR" to start the update process and follow the instructions.

Please note: The DIRECTOR will be shut down for the update process. Neither the display nor the device itself will have any function until the update is finisched.

Attention: All adjustments will be set to default values and all stored sound setups in the DIRECTOR (No. 3 - 22) will be erased!